Self Igniting Carbonizing Furnace(round) specification:
1.carbonizing capacity:800-1000kg/24h(from 2000-2500kg)
Self Igniting Carbonizing Furnace Features:
1.Self Igniting Carbonizing Furnace works by anoxic distillation carbonization.
2.Self Igniting Carbonizing Furnace Features is with rational structure. It adopts superheated stream cooling
system, reducing much heat consumption;The horizontal condenser can retrieve much wood tar.
3.Self Igniting Carbonizing Furnace Features is with higher speed cooling, shorter production cycle.
operating steps of the self igniting carbonizing stove:
1.Check the blower to see if it runs freely and smoothly.
2. Send water to condenser to test if it leaks.
3. Examine all binding parts if it is tight.
4. Connect wood tar pipe.
5. If everything is ready, load the furnace with the sticks. Sticks must be placed horizontally and evenly.
6.Close furnace door after loading.
7. Light the fuel in kindling furnace, start wind guiding blower,Close upper fire door and open lower fire door,
adjust the valve at smoke outlet, enable the flue pipe unimpeded.
8. When heavy smoke comes out from the outlet, remove kindling furnace, and continue to guide wind.
9. Temperature rising and cooling should accord with the Temperature rising and distillation curve.
10. Prepare some water before unloading.
11. Open the furnace door, take out the carbonized charcoal. If there is charcoal with sparks, distinguish it with water.